|
How to build a simple water feature |
||
 |
We are sure you have seen a hole before so here is ours already dug out and water tank installed. The blue sheet is our pre liner. | |
 |
The liner is laid out over the hole ready to be filled | |
 |
Filling in progress, the weight of the water pulls the liner into shape | |
 |
The feature is added (pump already attached The perimeter edge of the table does have holes to allow the water back in |
|
 |
The liner is then trimmed to give between -4-6 inches all around, this will catch any splash and direct it back to the sump | |
 |
The liner is then covered with decorative gravel, the pump then switched on | |
|
If you have a question please ask, but yes it really is a patio table. |
||
