Fountain Information

How to connect a nozzle to a pump

Connect a nozzle to a pipe, (15mm in these examples) how can you do it?

We can supply various connections to connect almost any nozzle to a 15mm pipe

In each picture below the same (15 mm)  pipe ends with the same connection

* Although it can easily be done the pipe can make restrictions on the amount of water available, in particular if the nozzle has  a wide inlet  / outlet.

All these parts (excluding pipe) can be found on the  parts website

The pipe itself is a standard 15mm diameter copper pipe

   This is schaumsprudler 35-10 e connected to a 15mm pipe*

1 inch inlet
     

  This is komet 3-5T connected to a 15mm pipe*

10mm inlet
     

  This is komet 5-8T connected to a 15mm pipe*

12.5 mm inlet
     

  This is vulkan 37-2.5k connected to a 15mm pipe*

25mm inlet
     

  This is vulkan 43-3T connected to a 15mm pipe*

25mm inlet

 
 

Please note, these are just some examples, the pipe diameter depends on water demand of the nozzle. Using a smaller diameter pipe will reduce the available flow rate.

Advice  index  page

Hit Counter more info

 

 Home page    Search This site   Site List Contact us Before you go

Read and then sign our Guest Book

Have you a fountain, (non cost related) question?  We will try and answer it.

Use the contact us button.

Often, a project is never completed because of the unexpected costs. Folk do not always want to hear the truth.

And finally............

 copyright 2001 -  2012 all rights reserved

Hit Counter (test counter)